Salam 1Malaysia....
   
      This week,I have an industrial visit.I was go to the Canon Opto (Malaysia) (COM) Sdn Bhd . This was developed at Shah Alam.In this visit there are two lecturer had follow us as our guardian at this factory.They are is Encik Redzuan and Dr Muzahidul Islam.

     We go to Canon Opto (Malaysia) (COM) Sdn Bhd by bus.We was gather at Kolej Siswa Jaya(KSJ) before we go to the factory.We was take the attendance at the KSJ to ensure that all student in elecsys were go to this factory.When we arrived, all of us are bring to & enter the briefing room. The COM worker show us on slide the agenda of the day. Then she give the microphone to Mr Huzaini. I don't remember what position he has in COM but I know its not a low position. He told us a little bit about COM profile.

   First place that we go to is the Water Treatment Plant.He also share with us COM compliance with environment regulations. He said,"COM has to comply the rules, regulations and standards imposed by the Malaysian government, Canon Inc. and COM itself in its daily operation. To ensure these compliances, COM carried out regular environment monitoring such as discharged water, underground water, air and noise.


 Scheduled waste and chemical handling also been properly managed in COM as required by rules, regulations and standards.COM also committed towards the product requirement including Product Chemical Substance Assurance (RoHS) which include Green Procurement activities."

Then we arrived at the water treatment plant. Mr Huzaini told us its function, "In order to preserve the natural resources, “Water Recovery Plant” was installed to treat waste water from production and use by cooling tower in air conditioning system."Next, Mr Huzaini bring us to waste minimisation centre. He explain that all waste chemical from production come here. From Canon policy, waste product can't be taken out from the factory to ask other factory to treat it. Canon factory itself need to treat its waste product.

Next, we moved to New Recycle Waste Yard/Bin Centre. The uniqueness in this centre is it has carbonizer machine. The carbonizer machine use heating element to transform the general waste into carbonized form. This process does not emit any hazardous gaseous. This centre also is a collection centre of solid waste.

 After that,we had been told to back to the briefing room,to take a rest for while,before continue our visiting.After this,we will enter inside the factory at the assembler division.The assembler division at the level 2.At this time,we was divided by 3 groups..I in the second group,The people who will guide us at this floor is En Hamid.En Hamid told us that COM only  do the making camera when it has request from the supplier..

 This my last blog for my assingment,I hope you was enjoy with my blog before this..I hope we will meet again at the other time...TQ...

Assalamualaikum….

& Salam 1Malaysia..

                                           

  This week, in my class of Introduction To Electronic System, was invited a speaker from outside to give some information about electronic system. The speaker is Mr Vivek Panicker, He is the excutive director of Titan Thermal Solution.The topic  that has been review in his lecture is overview electronic system, role of electronics in industry, overview of imaging industry, and electronic within thermal imaging industry.

  The first topic that he was covered is overview the electronic system…He was explain about the definitions on the electronics. He said that

     “electrical circuits that involve active electrical components such as vacuum tubes, transistors, diodes and integrated circuits, and associated passive interconnection technologies”

and the electronic system is a group of electronic circuit designed for a specific purpose. He also said that the electronic system is very important in our life today. Electronic system was become a fundamental to our daily life. Electronic system also has became  keyrole in the advancementof technology. Moreover, Electonic system can replace the old system or previous system to increase the technology. Example like the used of komuter and lrt as the transportation, before this people used old transportation example by bus or by taxi…this is the example of electronic system in our daily life today. The progression of electronic system has a flow that has relationship  between time with technology, example the electronic component size change from time to time, for a large electroni component it change to the small electronic component and change to the miniature electronic component..In our daily life we can has the changes ,example like from the personal computer(pc) now we have a laptop as replace to the pc.

The next topic is the role of  electronics in industry. In the modern day,electronics were become an important thing  to create a new technology. The system electronic also can became as the catalyst to enhanced production and productivity in the industry.System electronic also can increase the productivity and output for some field in the industry. That’s  is why electronics is so important in the most industry.

Then,we can divide the role of electronics in industry into five field.The first field is consumer,second is industrial,third is defence, fourthly is communications and the lastly is Information processing system.

   1)Consumer Electronics

      - Oldest segment of electronics with the advent of radio receivers

    - Geared towards the push of consumer products

      E.g. Microwave, Discman, Nintendo

2) Industrial Electronics

   - Oriented towards manufacturing products required by modern industry

   - Process controlled equipment, robotic equipment for test and measurement

  - E.g.  Network Analyzers , Robotic Arms, Electronic Control Systems

3)Defence

 - Strategic , creates spin-off electronics for other segments

 - Pushed the growth of Material Science technology

 - Frontier of modern electronics   

4) Communications

 - Current rapid growing field

 - Benefited from semiconductor lasers, optical fibre technology, digital techniques

5)Information Processing Systems

 - Development of  Integrated Circuits (IC’s), Application Specific Integrated Circuits (ASIC) designs,   

- Very Large Scale Integration (VLSI) circuits; micro-controllers, microprocessors, memory modules,                   Field- Programmable Gate Arrays(FPGA)

The next topic Is overview imaging industry.This field were required the electronics system to make it functions wisely.This field will become an important field,because it is the new field and need more an advancement to make it become more efficient..

                       

-PIXELS & RESOLUTION

                                         More pixels in an image,more sharper and clear the image.

That is the end,for my reflective journal on this week.So, I hope I can write more later about the another topis.

Salam 1Malaysia…..

  

  This week in my class Introduction To System Electronic….has attend a lecture about The Electronic         System Related To The Industry Automation-Japanese.The lecture was given by Mr Muhammad Azlan Bin Amran.He is a Senior General Manager,administrator center at Canon Malaysia..He was worked at Canon Malaysia about 20 years,so he has many experience in the world of work and Japanese culture work.It is because Canon is a company from japan.

    He was started the lecture by Introduced his company,Canon Opto Malaysia.He was explain about canon philosophy.Canon philosophy is “kyosei”.It was created by founded of Canon,means “living and working together for the common good”.He also showed some products that produced by Canon.Example DSLR camera,and others.At the Canon opto Malaysia only maked lens for DSLR.Example the lens that they were maked id Sperical lens and penta prism.

   He also explain the manufacturing company rules at Canon Opto Malaysia.The first rule is Products design,second is product development,third is product mass production trial,The fourth rule is product mass production and the last is sales and service.

  The Canon company is a big company.Canon Company must generated a new model products with the new technologies to the users.Canon must make a new technologies to compete with the other company..example SAMSUNG,NIKON,PANASONIC,and others company. always want to full the market demand. so, there are 4 features that must be in a product that produced from Canon. they are EQCD. what is the meaning of that word? here, i tell you okay. E = environment even though Canon want to full the market demand, they also considered the environment. for me, this is the one of the best ways to protect the environment from pollution. although the technology increase rapidly nowadays, we must think our environment too. This way can help the next generation to live happily. Q = Quality, even the price is expensive but have the best quality, it will be choose by the customer. C = cost, the cost before produce the product are decided early. there were not only have expensive price, there also have the lower price. The product also can be own by everyone. D = delivery they also can deliver the product to any place.

   Then,he was talked about the world of work and Japanese work culture.He also story about his experience and problem while working.He was started by the Japanese Work Culture,first Japanese work culture Is “HORENSO” .HORENSO was combining from three Japanese words.The words is “HOU”,”REN”,”SODAN”…”HOU” is means report. Report to your supervisor or project leader, to communicate the situation and status, or to seek information or advice as necessary.”REN” it means contact. Update your team members on the situation of your project, so that everyone knows what you’re doing. They will be able to take action accordingly, and work parallel with you.”SODAN” is means consultation, Consult with stakeholders, such as clients and those impacted by the project, to see whether this is what they want, and how you can improve.We can take the advice when we had a problem and others people can helped.

   

    Second is “SAN-GEN” means 3-gen.First is “genba”,”genbutsu”,”genjitsu”.”GENBA” means real place.  in concrete terms: go to the shop floor to understand the reality. This is a more effective method than simply reading a report.It means if some place had occurred some accident or problem,people incharge must go to that placed and make investigation what the factor that the problem or accident had occurred.”GENBUTSU” it means real part or actual thing.In concrete terms: look at the real part or the real service provided (whether good or bad) and analyze it while focusing on the facts.It mean people were incharged must see the thing that can make the accident were occurs.”GENJITSU”means reality. speak with data for a better understanding of the reality in the field.

  

  The 5S Process, or simply "5S", is a structured program to systematically achieve total organization, cleanliness, and standardization in the workplace. A well-organized workplace results in a safer, more efficient, and more productive operation.  It boosts the morale of the workers, promoting a sense of pride in their work and ownership of their responsibilities. "5S" was invented in Japan, and stands for five (5) Japanese words that start with the letter 'S': Seiri, Seiton, Seiso, Seiketsu, and Shitsuke. 

     

Japanese Term

English Equivalent

Meaning in Japanese Context

Seiri

Tidiness

Throw away all rubbish and unrelated materials in the workplace

Seiton

Orderliness

Set everything in proper place for quick retrieval and storage

Seiso

Cleanliness

Clean the workplace; everyone should be a janitor

Seiketsu

Standardization

Standardize the way of maintaining cleanliness

Shitsuke

Discipline

Practice 'Five S' daily - make it a way of life; this also means 'commitment'

                     

 In conclusion,I think Japanese work culture is very good and can give benefits to us.It will make become more discipline and become more respondsible person.It also can guide us become a punctual in our daily life.

Introduction To Bioelectronics

Salam 1Malaysia....

   This week,is the 8 week I was at UTM KL.This week,I not entering the electronic workshop,because I haved a lecture at the MJIIT building.This week,En Ridhwan does not take the class but this week,the class was handle by the new lecturer to me...He is Dr Azran Azhim.In my class this week has introduced a new programme to me.The programme is about Bioelectronics.

   Before Dr Azran started the class,he was briefly about himself to others.Dr Azran told us that he was stayed at the Japan about 15 years after finish secondary school.All his certificate which is from stage of diploma,bachelor,master and PhD are from Japan..

  Dr Azran was started the learning with the definition of bioelectronic.What is bioelectronic??Bioelectronic is recently coined term for a field of research that works to estblish a synergy electronics and biology..Bioelectronic also give the good impact to the nation economy and wellbeing,including healthcare and medicine,homeland security,forensics and protecting the enviroment and the food supply.

  Dr Azran also show some electronic components,electronics symbols,resistor colour codes....

                     
                                        This picture showed some electronic components..

                                         
                                         This picture showed some electronics symbols..

                                     
                                        This image showed how to measure the resistance..

 The subtopics is about Impedence.Impedence is used at the alternating current(AC).Impedence is same like resistance in the direct current(DC).

    Dr Azran also showed to us how to calculate the value of resistance,inductors,capacitance in series and parallel...

Then,Dr Azran also showed to us about the voltage divider..He was explain to us how to calculate

    The next topic,is about the Low-pass filter and High-pass filter.A low pass filter that can allow a low frequency signals but attenuates signals with the higher than the cutoff frequency..High pass filter also can allow a low frequency signals but the attenuates signals with the lower than the cutoff frequency..

                                        Passive electronic filter(RC filter with the low pass filter)

                                        passive electronic filter(RC filter with the high pass filter)

        The last subtopics,before the class end...is about the Molecularbiology.Dr Azran was show the image of cell staining,eukaryotic cell,mysteries of human dna,DNA double strand,and DNA structure..
                                           
                                                             This Cell Staining...

      
                                                      Black point:is the cell..
                                            Red orange background:Extracellular matrix
                                             
                                                         This is Eukaryotic Cell
                                 

               

                                                      Mysteries Of Human DNA

DNA double strand

DNA structure

     Finally,this my ending for my this blog for this week.So,I hope you are enjoy with my blog for this week ....Thank You..

The Ultiboard

             

                                                              Reflection 3


 Salam 1 Malaysia....

 This week..... I want to talk about The Ultiboard. In my opinion,I think Ultiboard is the great software because it can make our circuit become 3D. So, from this 3D view, I can understand this software clearly.This software can view the shape our component. For example, we can see clearly what is the shape  capacitor,resistance,LED,and so on.This software Ultiboard has a relationship with the software Multisim,because before I used Ultiboard, I must designed our circuit using Multisim. Only then i can transfer my schematic draft to ultiboard.

Do you know what is mean by Ultiboard??
From my research...Ultiboard is used to design printed circuit board,perform certain basic mechanical CAD operation and prepare them for manufacturing,and also provides automates parts placement and layout.

                                              This is the toolbar at the ultiboard

    *The menus and toolbar give you access to the ultiboard commands


This week I have test on Ultiboard..because last week I have already learn how to used the Ultiboard software.This week En.Ridzwan want to test us,how far we understand to used the ultiboard Picture below showing the question for my test this week....

                                           
                                                           This my test for this week...

              After I received my test,I designed my task in the Multisim software....

        This is my circuit in multisim before I transfer it to the Ultiboard..After I have done designed my circuit in multisim,the next step is to transfer to the Ultiboard...

        But En Ridzwan want us to build the new board outline,i mean with different shape board outline.So,I have designed my own board line with my own creativity...

     
      Now...this is my new board outline..before I arrange my components part I will tell you how to make the board outline or change the shape of my circuit board:

1.Firstly,you must click layer and choose board outline..
2.Then,you right click on your board line and go to shape and choose the shape that you like for your board outline...
3.After you have finished designed your board outline...you can delete your original board outline...
 
      Next step is,I want to arrange my component in my new outboard line.....

    Now,I have done arrange my component in my board....Now,i want to tell you how to arrange our component:
1.you must choose copper top at your layer....It want to make sure that your board does not moving while you want to arrange your components...
2.Then,you click the Enable selecting parts at your tools box,after that, you can arrange your component with your creativity that you like...
After that,En Ridhwan want my some component at the bottom of my board...so to do that we must ...

1.Select the component that you want to bring to the bottom of your board outline...
2.Then,double click at your selected component one by one...and choose position and selected your board side..

      Next steps is,you auto route your ultiboard....auto route is wanted to make our circuit connection become more tidy....

                                                      This circuit is not auto route yet.....

This circuit was done autoroute...after autoroute,we can change the thickness your route layer...to edit the thickness of route layer:

1.you close the enable selecting parts button and open the enable selecting traces...
2.Then,you select all the traces in your board outline..and double clik on your traces and adjust the thickness of your route layer...with the thickness that you like....


After that,you can view your circuit in 3D view.....

                                   This picture show us the component at the top of our board line

                                 This picture show us the component at the bottom of the board..

       In my conclusiom,I think the Ultiboard software is a user friendly.Many people can learn how to used or operate this software...That's all from I for this week....Tq.....

The Multisim

Salam Satu Malaysia....


Today is my second class in the subject Introduction to Electronic System Engineering,(code SMJE 1032).

In this class, Dr Kamal take over the class about 10 to 20 minutes to give briefing about the how to write a good reflective journal, the skills, criteria assessment and every things about reflective journal.The grading actually conclude every critical points on what is the best criteria. The journal that we write, must be creative and original. That one is more likely to be the one of the most important part of grading.

This is the guideline how to write a very good reflective journal.

This is the schedule to hand in the reflective journal.

After 20 minutes the class,Dr. Kamal give the class to En. Redzuan. Then, En. Redzuan teach us about something new to us that is multisim software, and what the function of that software. I'm really eager to know about this software, really. En. Redzuan teach us about this software and what can this software do. So, En. Redzuan start the briefing, and he wanted all of us to focus and watched carefully what he gonna show us, that is how to use this software. It is really fascinating when we observe the expert En. Redzuan working with the software. I mean how he manage to memorize all the icon and every things that is related (seriously, there is really a lot of things u know).

This is the version that we used during the workshop.

This is the 1 that i successfully finish... The LED light up man!! hehehe

En. Reduan really giving us many information about knowledge of this multisim. En. Redzuan told us about the old name of multisim, that is workbench. He also told us about the function of multisim. En. Redzuan tell us that multisim is a simulation to design an electrical built. This multisim software concept is to build student expertise through practical application in designing, protyping and testing the electrical circuits. This software is very useful to us, because this software consists of everything that we need in building up an electrical circuit example, as there are many part of the procedure that is electronic component, board, wiring and other.

After we finish the multisim task, En. Redzuan brief us a bit about the ultiboard and what we gonna learn in the next workshop class.. With that, we finish the class for this week.

See u guys in the next workshop!! TQ.....

My First Class

    MY FIRST CLASS ON SUBJECT ELECTRONIC SYSTEM

       On the last 11 Sep 2012....it was my first time class in the subject of Introduction To Electronic System

Engineering....The class was start at 9.00am to 12.00pm...
     
       The first activity on this class is about introduction ourself to everbody in the class..This activity is so

interesting....we can know about each other in deeply....

        My first lecturer in this subject is Dr Kamal...On that day,Dr Kamal was give a test in that class.The

test is about the knowledge in the electronic system..Then,Dr Kamal was give briefly about the electronic

system introduction..He also give some advice in that class..for study hard in this subject..........

                                    Only this from me...right now..Thank You